sml-p11dt orange SML-P11UT sml-p11vt red yellow sml-p11yt green(yellowish green) sml-p11mt algainp on gaas directivity (typ.) sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt 52 52 50 50 54 20 100 5 -40 to +85 -40 to +100 :duty 1/10, 1khz. absolute maximum ratings (ta=25 c) electrical optical characteristics (ta=25 c) dimensions (unit:mm) tolerance: 0.1 (unit:mm) the recommended thickness of the screen mask for soldering is between 80 and 130m. the hole size of the screen mask should be same as the recommended land pattern or smaller. recommended pad layout sml-p11 series yellow orange red red emitting color material package size (mm) part no. peak forward current i fp (ma) part no. power dissipation p d (mw) forward current i f (ma) reverse voltage v r (v) operating temperature t opr ( c) storage temperature t stg ( c) emitting color 0402<1.0 0.6 t=0.2mm> low current type green ( yellowish green ) packaging specifications (unit:mm) tape specifications:t86 <10,000pcs/reel> feeding direction reel specifications 13 60 180 11.41 tolerance: 0.2 tolerance: 0.2 + 1 0 0 ? 3 1 100 4 0.63 2.5 2.5 1.6 1.0 2.1 7.6 7.3 5.5 3.6 569 586 605 621 626 11 1.9 1.9 1.8 1.8 1.8 transparent colorless sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt part no. forward voltage v f light wavelength reverse current i r brightness i v i f ( ma ) typ. ( v ) typ. ( mcd ) typ. ( nm ) d min. ( mcd ) i f ( ma ) i f ( ma ) max. ( a ) resin color v r ( v ) dominant 0.6 0.5 0.5 0.4 20.05 1.5 1.750.1 0 to 0.5 0.68 8 3.50.1 5.5 1.10 + 0.1 0 40.1 label position picoled tm - eco 1006(0402) 1.0 0.6 ( t=0.2 ) 0.280.1 relative luminous intensity ( % ) angular displacement ( deg ) angular displacement ( deg ) relative luminous intensity ( % ) x - y 0 50 100 50 100 0 30 60 90 30 60 90 x' - y' 0 50 100 50 100 0 30 60 90 30 60 90
forward voltage : v f (v) forward current : i f ( ma ) 20 10 0 0 -10 10 20 -20 30 -30 40 -40 50 70 80 60 90 30 ambient temperature : ta ( c ) maximum forward current : i f m ax. (ma) relative luminous intensity case temperature : tc ( c) ratio of maximum tolerable peak current to maximum tolerable dc current i f peak m ax. i f m ax. pulse duration : tw ( s) 1.4 1.2 1.0 0.8 0.6 0.4 40 -20 -40 -30 -10 20 010 30 50 60 70 80 90 100 1.6 i f =20ma 10khz 2khz 1khz 200hz 100hz 1 1 10 5 10 100 1000 10000 sml-p11yt sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt sml-p11yt sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt sml-p11yt sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt sml-p11yt sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt sml-p11yt sml-p11mt sml-p11yt sml-p11dt SML-P11UT sml-p11vt 0.1 1.0 10.0 100.0 1.5 2.0 2.5 ta=25 c electrical characteristic curves forward current - forward voltage derating relative luminous intensity - forward current relative luminous intensity - case temperature ratio of maximum tolerable peak current - pulse duration relative luminous intensity forward current : i f (ma) 0 20 40 60 80 100 120 0 5 10 15 20 ta=25 c
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / eupope / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2007 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21, saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix
|
